Oki lan 7100e+ - Manual (Page 16)

16 Network print server
|
!
Notes:
Operation with any web browser other than the above
cannot be guaranteed.
The printer must be connected to the network via TCP/
IP and configured with a valid IP address.
To change the configurations, log in as a ìrootî user.
The password for a ìrootî user when using a web
browser is the last 6 digits of the OKI print serverís
MAC Address, which cannot be changed. The MAC
address can be found on the fax machine configuration
page (see Printing a Configuration Page from the fax
machine Front Panel, above).
The following description is an example for the setting of the
fax machine using Microsoft Internet Explorer Ver. 4.0 on
Windows 98. The configuration method varies depending on
your web browser.
1 Configure an IP Address, subnet mask and gateway to the
network print server.
2 Start up the web browser and enter the IP address of the
network print server in [Address (Location)], then press
Enter. The Printer Status Screen displays.
For example, if the IP address is 193.132.3.80, then enter the
following:
h t t p : / / 1 9 3 . 1 3 2 . 3 . 8 0
3 Click the item to be changed in the left frame. A detailed
screen for each item displays. For details, see ìSettingsî
below.
!
If frames cannot be seen, you may be using a browser
that does not support frames. In this case, use the
links below the printer status window.
4 After the changes, click Submit.
5 Enter ìrootî in [User Name] and the last six digits of the
print serverís MAC address in [Password], then click [OK].
The MAC address can be found on the ìNetwork
Connectionî page.
!
Notes:
For example, if the MAC address is
ì00:80:92:00:11:BCî, input
ì0011BCî in [Password]. The screen will display
******.
The MAC address displays on the network print
server configuration page (see ìPrinting a
Configuration Page from the fax machine Front
Panel,î above).