Oki lan 7100e+ - Manual (Page 35)

|
User’s Guide: English 35
Setup Dialog
The setup dialog lets you select a print server to monitor, set
the Pop-Up Monitor configuration and screen related
settings.
Status Monitoring
In this screen, you can select the print server you wish to
monitor. You cannot select the IP address that is already
selected. If you click Search, OKI Print Monitor searches for
new OKI Devices on the network.
To set the Broadcast IP address of the network to search, click
Search Path…. The following screen appears.
To add an IP address, enter the new IP address in the box next
to Add and click Add. The maximum number of IP addresses
that can be monitored is 16.
If you wish to delete an IP address, enter that IP address from
the search list next to Delete and click Delete.