Oki lan 7100e+ - Manual (Page 47)

|
User’s Guide: English 47
LINK 100M Light (green LED, center)
Lights when the NETWORK PRINT SERVER is connected
using 100BASE-TX.
LINK 10M Light (green LED, near cable)
Lights when the NETWORK PRINT SERVER is connected
using 10BASE-T.
Network print server Status Lights
Three status lights (LED’s) on the network print server card
indicate print server status for troubleshooting.
STAT Light (red LED)
Flashes when the NETWORK PRINT SERVER receives
data. If the NETWORK PRINT SERVER detects an
abnormality, the STAT LED performs one of the
following:
• Flashes at fixed intervals
• Stays on
• Stays off.
Turn the machine off and then on to reset the error
condition. If this does not work, then do the self
diagnostics test.