Olympus C-100 - Manual (Page 10)

10 En
6 Set the first item using the / buttons
and press the button.
Move to the next item.
7 Repeat until the date and time settings are
adjusted.
8
Press the button when the time reaches
00 seconds.
Setting of the date and time is completed.
9 Press the button again.
The date and time adjustment menu will be
completed.
10
Press the button to turn the monitor off.
Caution
The date and time settings will be erased or become incorrect if the camera is
left without batteries or the batteries are exhausted. Make sure that the date and
time settings are correct before taking an important picture.
Note The date and time can be adjusted both in Record mode and Play mode using
the same procedure.
4/24/01, 3:42 PM Page 10