Displaying image information – Olympus C-100 User Manual
Page 27
27
En
Caution
• All protected images will be erased. Once formatted, the SmartMedia card or
internal memory cannot be restored.
• Cards with a write-protect seal affixed to them cannot be formatted. Remove
the seal before formatting the card. Do not re-use seals.
■
MEMORY BACK-UP
This function enables you to copy all image data recorded in the internal
memory onto a SmartMedia card. Insert the card before following the procedure
below.
1
Insert the SmartMedia card.
2
Press the
button with the lens barrier closed.
3
Press the
button.
4
Select [SETUP] using the
/
buttons and press the
button.
5
Select [
] using the
/
buttons and press the
button.
6
Select [
BACKUP] using the
/
buttons and press the
button.
All the images in the internal memory will be copied onto the card.
■
DISPLAYING IMAGE INFORMATION
This function enables you to set display or non-display of image information
on the monitor while the image is played back. If you enable this function,
these information is displayed for 5 seconds.
Image data display ON
Image data display OFF
5/22/01, 6:14 PM
Page 27