Rec view, Beep sound, Adjusting the monitor brightness – Olympus C-100 User Manual
Page 25
25
En
■
REC VIEW
This function enables you to check an image by displaying it immediately after
it is taken.
1
Open the lens barrier and press the
button.
2
Select [SETUP] using the
/
buttons and press the
button.
3
Select [REC VIEW] using the
/
buttons and press the
button.
4
Select [ON] using the
/
buttons and press the
button.
ON: The last image taken is played back after shooting is completed.
OFF: The screen for shooting the next image is played back immediately
after shooting is completed.
Setting of the Rec View is completed.
Press the
button again to exit the menu.
Note
The Rec View mode is saved when the camera is turned off.
■
BEEP SOUND
This function enables you to turn the warning beep sound off.
1
Open the lens barrier and press the
button.
2
Select [SETUP] using the
/
buttons and press the
button.
3
Select [
] using the
/
buttons and press the
button.
4
Select [OFF] using the
/
buttons and press the
button.
The beep sound will be turned off.
Press the
button again to exit the menu.
Note
• The beep sound setting is not cancelled when the camera is turned off.
• You can also set the beep sound from the Play menu.
■
ADJUSTING THE MONITOR BRIGHTNESS
1
Open the lens barrier and press the
button.
2
Select [SETUP] using the
/
buttons and press the
button.
5/22/01, 6:14 PM
Page 25