Quantum 560UF/L - Manual (Page 10)

CHAPTER 2. INSTALLATION
ACTIVE Professional External Modem User’s Manual
6
Modem Configuration Table (Further reference: Appendix G)
Menu (0-C, set by Menu switch)
0 Factory default - &F
function (set by switch)
(0)Auto,(1)MNP,(2)Direct Mode.
1 Asyn - &Q
function
(0) Asyn
2 Type of line - &L
function
(0) Dial up, (1) 2 wire LL
3 Modulation - +MS
function
(0) auto (1) bell103, (2) V.21, (3) V.22/bell212, (4) V.22bis
(5) V.23, (6) V.32/V.32bis, (7) V.34/V.34+
4 DTE speed
function
(0) get from profile 0, (1) 115200, (2) 57600, (3) 38400, (4) 19200,
(5) 14400, (6) 9600, (7) 4800, (8) 2400, (9) 1200, (A) 300
5 TX level - S91
function
(0) –10, (1) – 2, (2) – 4, (3)-6, (4) –8, (5) – 9, (6)-11, (7)-12, (8)-13,
(9)-14
6 Rx level - %R
function
(0)-43, (1) –33
7 Dial stored Tel. No. (please refer to the section ‘Use T/D Switch to dial’.)
function
(0) Normal
(1) Dial tel. no(stored by AT&Z1)
(2) Dial tel. no(stored by AT&Z2)
(3) Dial tel. no (stored by AT&Z3)