Quantum 560UF/L - Manual (Page 39)

APPENDIX C. S REGISTERS
ACTIVE Professional External Modem User’s Manual
35
Sets the transmit level from 0 to -15 dBm for the FAX mode. The value
may be limited as it is a country dependent parameter.
S95 * Extended result codes
Bit 0
CONNECT result code includes DCE speed instead of DTE
speed
Bit 1 Append /ARQ to verbose CONNECT XXXX result code if
protocol is not NONE
Bit 2 Enables CARRIER XXXX result code
Bit 3 Enables PROTOCOL XXXX result code
Bit 4 Reserved
Bit 5 Enables COMPRESSION result code
Bit 6 Reserved
Bit 7 Reserved
S99 Leased line transmit level (Range:0-15) Default : 10
Sets the transmit level from 0 to -15 dBm for the leased line mode. The
value may be limited as it is a country dependent parameter.