QMS Scanner - Manual (Page 14)

3-1
3. QMS SC-100 DRIVER
INSTALLATION
To run QMS SC-100 at optimum speed, the following
minimum requirements are recommended:
•
IBM compatible PC 386/486, Pentium or later;
•
Microsoft Windows 3.1,Windows 95, Windows
NT;
•
One printer port available (enhanced parallel port
recommended);
•
Megabytes of available hard disk space for
installation;
•
Megabytes of RAM (16 Megabytes or higher
recommended);
•
A video graphics array (VGA) monitor;
•
A Microsoft Windows-compatible pointing device
(e.g., mouse);
•
A CD ROM drive.
3.1 INSTALLATION PROCEDURE
Installation procedures of QMS SC-100 driver are as
follows:
1. Start Windows 3.1 or Windows 95.
2. Insert software CD into your CD ROM drive.
In Windows 3.1 or higher
3. From the File Menu, choose RUN, type d:\driver\SC-
100.exe (d represents the letter for your current CD-
ROM drive). Click O.K.