QMS Scanner - Manual (Page 26)

4-10
CHANGING YOUR COPY DENSITY
Copy density refers to the degree of darkness which the
digital copier has reproduced. There are times when your
original is unsatisfactorily darker or lighter. It is a great
advantage using the density feature to compensate the
unsatisfactorily original.
The Operating Steps:
1. Place your original face down on the document glass.
2. Press the “Lighter/Darker” button. The Message
window displays the default degree of darkness.
3. Repress the “Lighter/Darker” button to select other
level. Or you may press the “s” to increase the level,
press the “t” button to decrease the level.
4. Press the Copy button. Your printout shows the
darkness or brightness has been compensated.