QMS Scanner - Manual (Page 29)

4-13
MAKING COPIES OF A 3D OBJECT
The digital copy solution improves your copy reproduction
significantly and even makes a 3D object copies amazingly
clear.
The Operating Steps:
1. Place your 3D object on the document glass.
2. Press the “Copy Quality” button and the Message
window displays “Normal mode”.
3. Repress the “Copy Quality” and the Message window
displays “Quality mode”.
4. Press the Copy button. Your 3D object copy is done.
The 3D copy with a normal copier The amazing 3D copy with QMS SC-
100