QMS Scanner - Manual (Page 37)

5-7
Color Matching:
Adjusts the color quality of the image to make it
close to the original. This function uses default
parameters to adjust the image.
Reset: Resets the scanning parameters you set.
Invert: The invert command reverses the brightness and
the color in the image. For color images, each
pixel will be changed into its complementary color
at the command of Invert.
Calibration: Defines Brightness for the QMS SC-100. Users
are recommended to calibrate the light source if
the scanned image looks undesirable or comes out
to be too dark.
Quality/Speed Mode:
Users can select the mode to perform scanning
according to their own need. Select quality mode
scanning if your emphasis is on the quality of the
scanned image. Or you can select speed mode
scanning if you want to speed up the scanning
process.
Pixel/Inch/Cm:
Represents the different measuring systems to be
used in each scan.