Quantum 600 XL - Manual (Page 19)

Quantum 600 XL www.quantumrehab.com 19
MANUAL FREEWHEEL LEVERS
The Quantum 600 XL has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage the
drive motors from the gearboxes and manoeuvre the chair manually.
WARNING! Do not use the power chair while the drive motors are disengaged! Do not disengage
the drive motors when the power chair is on an incline, as the unit could roll on its own, causing
injury!
To engage or disengage the drive motors:
1. Locate the lever on top of each motor.
2. Pull the two levers upward to engage the drive motors. See figure 8.
3. Push the two levers downward to disengage the drive motors. See figure 9.
If a lever is difficult to move in either direction, slightly rock the power chair back and forth. The lever should then move to
the desired position.
WARNING! It is important to remember that when your power chair is in freewheel mode, the
braking system is disengaged.
I I I . Y O U R P O W E R C H A I R
Figure 9. Freewheel Mode (Drive Disengaged) Figure 8. Drive Mode (Drive Engaged)
MANUAL FREEWHEEL LEVER
MANUAL FREEWHEEL LEVER