Quantum 600 XL - Manual (Page 29)

Quantum 600 XL www.quantumrehab.com 29
Positioning Belt
Your power chair may be equipped with an automotive-
type positioning belt that can be adjusted for operator
comfort. See figure 26. The positioning belt is designed
to prevent the operator from sliding down or forward in
the seat. The positioning belt is not designed for use as a
restraining device.
To adjust the lap belt:
1. When seated, insert the metal tab into the plastic hous-
ing on the opposite strap until you hear a click.
2. Pull the strap until it is secure, but not so tight as to
cause discomfort.
MANDATORY! Prevent personal injury!
Make sure the positioning belt is
properly secured to the power chair and
is adjusted for operator comfort before
each use.
MANDATORY! Prevent personal injury
and product damage! Inspect the
positioning belt for loose or damaged
parts before each use of the power
chair. If you discover a problem, contact
your authorised Pride Provider for
maintenance and repair.
Figure 26. Positioning Belt
V . C O M F O R T A D J U S T M E N T S