Quantum 600 XL - Manual (Page 27)

Quantum 600 XL www.quantumrehab.com 27
V . C O M F O R T A D J U S T M E N T S
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a hex key.
See figure 20.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the setscrew.
2. Loosen the locking nut that secures the setscrew.
3. Turn the setscrew anticlockwise to raise the front of the
foot platform.
4. Turn the setscrew clockwise to lower the front of the
foot platform.
5. Tighten the locking nut to secure the setscrew.
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off of your power
chair. See figure 22.
To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the back of
each footrest extension.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.
Elevating Leg Rests
Elevating Leg Rests (ELRs) offer an infinite range of adjust-
ment for the leg angle and a footrest adjustment range of
30.5–48.25 cm. See figure 23.
To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the back of
each leg rest extension.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
Figure 22. Swing-Away Footrests
ADJUSTMENT
SCREWS
EXTENSION
SFR RELEASE LEVER
ADJUSTMENT
SCREWS
RELEASE LEVER B
Figure 23. Elevating Leg Rests
RELEASE LEVER A
EXTENSION
ADJUSTMENT BOLT
ADJUSTMENT SCREWS
Figure 24. Heavy Duty Drop-In Leg Rests
LEG REST
HANGER
LEG REST
EXTENSION