Quatech Serial Device Server - Manual (Page 37)

Quatech SDS User’s Manual Installing the device drivers
Figure 25 - Serial Device Server is Configured for a Remote Subnet
Step Procedure Description
Step 31 Select one of the following options:
¾ I’ve already moved the SDS to the
remote subnet. Press Next to continue.
¾ I’ll move the SDS later and run the
wizard again. Press Next to continue.
The Network Connectivity Test screen
displays. Go to □ Step 14.
The Wizard closes and returns you to the
desktop.
Figure 26 allows you either to
move the SDS to its permanent
subnet location and continue
the installation or to exit the
wizard and install the SDS at
a later time.
July 2005 940-0183-153 Page 31