Quatech Serial Device Server - Manual (Page 84)

Configuring the SDS using a Web interface Quatech SDS User’s Manual
Upgrading firmware
Step Procedure Description
‰
Preliminary
Step
Click on Admin in the selection bar and
then select Upgrade Firmware from the
left panel.
The Upgrade Firmware screen
displays.
Figure 67 - Firmware Upgrade screen
Note: Only SDS devices with a
firmware revision level of 5.0
and above can support SNMP.
Determine the revision level of
an SDS (check the bottom of
the Home page in the Web-based
interface) before upgrading the
firmware.
Step Procedure Description
‰
Step 1 Browse to the location with the revised
firmware file.
Most of Quatech’s device drivers are
available from our Web site.
‰
Step 2 Press Send File. The Remote Reset screen displays.
Figure 68 - Remote Reset
Step Procedure Description
‰
Step 3 Press Reset to reset your SDS. The SDS must be reset to implement the
new firmware.
Page 78 940-0183-153 July 2005