Scrolling the theaterwide, Picture (theaterwide 2 and 3 only), Using the auto aspect ratio feature – Toshiba 15CV101U User Manual
Page 37: Selecting the cinema mode
37
Chapter 6: Using the TV’s features
Scrolling the TheaterWide
®
picture
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the
TheaterWide 2 and TheaterWide 3 modes for each
input.
Note: When receiving a signal at 480i
resolution, the picture scroll function may
have limited adjustment range.
Using the auto aspect ratio
feature
When the auto aspect ratio feature is set to On, the
TV will automatically select the picture size when
one of the following input sources is received:
•
A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE input
•
A 480i signal from the Video input
•
A 480i signal from the ColorStream HD input
•
A 480i, 480p, 720p, 1080i, 1080p, or VGA
(60Hz) signal from the HDMI 1/2 input
Note: The auto aspect ratio feature is not
applicable to the PC input.
To turn on the auto aspect ratio feature:
Selecting the cinema mode
When you view a DVD (3:2 pulldown processed)
from a DVD player connected to the Video,
ColorStream HD (component video), or HDMI
inputs on the TV, smoother motion can be obtained
by setting the Cinema Mode to Film.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
To set the Cinema Mode to Video:
Select Video in step 2 above.
1
From the Picture menu, press or to
select Theater Settings and then press
.
2
In the Picture Size field, select either
TheaterWide 2 or TheaterWide 3 (you
cannot scroll in any other mode).
3
Press to highlight the Picture Scroll field.
4
Press or to scroll the picture up and
down as needed and then press
.
5
To save the new settings, highlight Done and
then press
.
To revert to the factory defaults, highlight
Reset and then press
.
1
From the Picture menu, press or to
select Theater Settings and then press
.
2
Press
or
to
select
Auto Aspect Ratio
and then press or to select On and then
press .
3
To save the new settings, highlight Done and
then press
.
To revert to the factory defaults, highlight
Reset and then press
.
1
From the Picture menu, press or to
select Theater Settings and then press
.
2
Press
or
to
select
Cinema Mode and
then press or to select Film and then
press .
3
To save the new settings, highlight Done and
then press
.
To revert to the factory defaults, highlight
Reset and then press
.