Chapter 11: troubleshooting – Toshiba 15CV101U User Manual

Page 76

Advertising
background image

76

Chapter 11: Troubleshooting

If the TV still does not act as expected, use

the Reset Factory Defaults procedure (

Page 32).

Channel tuning problems

The channel may be blocked by the Channel

Options feature. Unblock the channel

(

Page 30).

If you are unable to tune digital channels,

check the antenna configuration (

Page

28). If you are still unable to tune digital

channels, use the Reset Factory Defaults

procedure (

Page 32). Also see “TV stops

responding to controls” and “Other problems”

(

Page 75).

Closed caption problems

If the program or video you selected is not

closed captioned, no captions will display (

Page 39).

If text is not available, a black rectangle may

appear. If this happens, turn off the closed

caption feature (

Page 39).

A closed-caption signal may not display

correctly in the following situations: a) when a

videotape has been dubbed; b) when the

signal reception is weak; or c) when the signal

reception is non-standard (

Page 39).

Rating blocking (V-Chip) problems

If you forget your PIN code: While the PIN

code entering screen is displayed, press

four times within 5 seconds. The PIN code you

previously stored will be cleared (

Page

42).

The V-Chip feature is available for the U.S.

V-Chip system only (

Page 43).

No REGZA-LINK

®

operation

The REGZA-LINK

®

feature is available for

Toshiba REGZA-LINK

®

compatible devices.

Make sure the HDMI cables with the HDMI

Logo (

) are used.

When the connected REGZA-LINK

®

device

does not work correctly after you have

changed settings of the device, turn off your

TV and unplug the power cord, and then plug

and turn on again.

If several devices are connected, REGZA-

LINK

®

feature may not operate properly.

Read the instruction manual furnished with

the connected REGZA-LINK

®

device.

HDMI problems

For HDMI cables

Make sure to use cables with the HDMI Logo

(

) (

Page 17).

For Legacy HDMI source

Some legacy HDMI sources may not work

properly with the latest HDMI TV products,

due to new standard adoption.

Media Player problems

Make sure that devices are connected

correctly.

If you connect a USB device with separate

cable or through USB hub, the TV does not

recognize the USB device.

Disc playback problems

Playback does not start

No disc is loaded.

The disc may be dirty. Clean the disc.

The disc format is not supported (

Page 8).

No picture

The TV is not in DVD mode.

No sound

The TV is in the special playback mode (

Page 57).

If an external speaker is connected, check its

volume control.

Picture distortion during fast reverse/forward

playback

The picture will be distorted occasionally. This

is normal.

Playback features failure

The playback features such as stopping,

searching, slow motion play, repeat play or

programmed play, etc are not applicable to all

discs.

Playback does not start when the title is

selected

The disc may not be compliant with the

“Parental” setting (

Page 73).

The audio soundtrack and/or subtitle

language cannot be changed

The disc has no multilanguage option

encoded on it (

Page 63).

No subtitle

The disc has no subtitle encoded on it.

Subtitles are disabled. Press

(

Page

63).

Scene angle cannot be changed

The disc has no multiangle scenes (

Page

62).

X” appears on the screen

The function is not applicable to the disc or to

the current mode (

Page 7).

Advertising
This manual is related to the following products: