Toshiba 15CV101U - Manual (Page 41)

41
Chapter 6: Using the TV’s features
To listen to stereo sound:
Note:
• You can typically leave the TV in Stereo
mode because it will automatically output
the type of sound being broadcast (stereo or
monaural).
• If the stereo sound is noisy, select Mono to
reduce the noise.
To listen to an alternate language on an
ATSC digital station (if available):
Highlight the Language field in step 2 above,
and then press or to select the language you
prefer.
To listen to a second audio program on an
analog station (if available):
Select SAP in step 2 above.
Note:
• A second audio program (SAP) can be
heard only on those TV stations that offer it.
For example, a station might broadcast
another language as a second audio
program. If you have SAP on, you will see
the current program on the screen but hear
the other language instead of the program’s
normal audio.
• If you have SAP on and the station you are
watching is not broadcasting a second audio
program, the station’s normal audio will be
output. However, occasionally there is no
sound at all in SAP mode. If this happens,
set the MTS feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the
bass, treble, and balance.
Note: Selecting Speakers in step 2 and
setting it to Off will mute the TV’s built-in
speakers.
Selecting the optical audio output
format
You can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio system to the
Optical Audio Out terminal on the TV (
“Connecting a digital audio system” on Page 22).
1 From the Sound menu, press or to
select Audio Setup and then press .
2 Press or to select MTS, and then press
or to select Stereo.
3 To save the new settings, highlight Done and
then press .
To revert to the factory defaults, highlight
Reset and then press .
1 From the Sound menu, press or to
select Audio Settings and then press .
2 Press or to select the item you want to
adjust (Bass, Treble or Balance).
3 Press or to adjust the level.
• makes the bass or treble weaker or
increases the balance in the left channel
(depending on the item selected).
• makes the bass or treble stronger or
increases the balance in the right
channel (depending on the item
selected).
4 To save the new settings, highlight Done and
then press .
To revert to the factory defaults, highlight
Reset and then press .
1 From the Sound menu, press or to
select Audio Setup and then press .
2 Press or to select Optical Output
Format and then press or to select either
Dolby Digital or PCM, depending on your
device.
3 To save the new settings, highlight Done and
then press .
To revert to the factory defaults, highlight
Reset and then press .