Toshiba 15CV101U - Manual (Page 48)

48
Chapter 6: Using the TV’s features
REGZA-LINK ® Player Control menu
functions
Note:
• These functions depend on the devices that
are connected.
• The REGZA-LINK Player Control item will
be grayed out in the following conditions:
- A non-HDMI input is currently selected.
- The Enable REGZA-LINK item is set to
Off.
- The connected CEC device is not a
playback or recording device.
REGZA-LINK ® input source
selection
If a REGZA-LINK ® device with HDMI switching
capability (e.g. Audio Receiver) is connected to
the HDMI input, you can select another REGZA-
LINK
® device that is connected to the master
HDMI device using on the remote control or
the TV control panel ( Page 33).
VOLUME and MUTE controls of
Audio Receiver
With your TV’s remote control, you can adjust or
mute the sound volume of the Audio Receiver.
• adjust the volume level.
• turns off the sound.
Note:
• To use this function:
- Set Speaker Preference to Audio
Receiver in the REGZA-LINK Setup
menu.
- Confirm that a connected REGZA-LINK ®
device (such as DVD player, etc.) is
selected for the Audio Receiver input
source.
• You can also use this function when the
audio receiver is connected to the TV’s
DIGITAL AUDIO OUT terminal (not HDMI
connection). In this case, select a digital
audio input mode on the Audio Receiver.
• These functions depend on the device
connected.
Other REGZA-LINK ® functions
When the Enable REGZA-LINK and each item
in the REGZA-LINK Setup menu are set to On,
the following functions will be enabled.
1 From the Preferences menu, press or
to select REGZA-LINK Player Control and
then press .
2 Press or to select the item you want to
control and then press .
Item Description
Power Turns the selected device on and
off.
Root Menu Accesses the top menu of the
selected device.
Contents
Menu
Accesses the contents list when you
press . At this time, the
REGZA-LINK Player Control
menu will disappear.
Setup Menu Accesses the setup menu of a DVD
player.
Top Menu
Accesses the top menu of a DVD
during playback.
Menu
Accesses the menu of a DVD
during playback.
Item Description
TV Auto Input
Switch
If a connected HDMI device
starts playing video or audio, the
TV will automatically switch to
the appropriate HDMI input.
TV Auto
Power On
If a device is turned on, the TV
turns on automatically.
Device Auto
Standby
If the TV is turned off, the TV
will send a message to turn off all
of the devices connected to the
TV.
Speaker
Preference
From this item, you can set your
audio output preference to the
TV speakers or the audio
receiver speakers. When this
item is set to Audio Receiver,
the TV remote can be used to
adjust or mute the volume of the
audio receiver. This item will be
grayed out unless a REGZA-
LINK
® compatible audio
receiver is connected.