Toshiba SD-6915SU - Manual (Page 12)

ENG-12
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
• Refer to the owner’s manual of the additional components you are connecting for more information on those
particular components.
Connection to an Audio System
Note
• In case of DVD-AUDIO, SACD playback cannot use Digital Audio Out.
• In case of SACD playback cannot use multi channel or 2 channel Digital Audio out. (See page 31~32)
Method 1 Method 2
R - AUDIO - L
R SURROUND L S/W
R FRONT L CENTER ANALOG AUDIO OUT
Analog Audio Out
(2 Channel)
Analog Audio Out
(Multi Channel)
Digital Audio Out
2ch Amplifier
Audio Input Jacks
5.1ch Analog Amplifier
Audio Input Jacks
AUDIO
SYSTEM
DVD
Player
Method 3
COAXIAL
OPTICAL
Dolby Digital Decoder
Digital Audio Input Jack
OR