Toshiba SD-6915SU - Manual (Page 13)

ENG-13
Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
• Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on.
Method 1
DVD Player + TV with Video Input Jack
(The Video Output must select the S-Video or 525i(480i) by setting Video select switch.)
Method 2
DVD Player + TV with S-Video Input Jack
(The Video Output must select the S-Video by setting Video select switch.)
Method 3
DVD Player + TV with Component Video Jacks
(The Video Output must select the 525i(480i) by setting Video select switch.)
Method 4
DVD Player + TV with Progressive Scan Jacks.
(The Video Output must select the 525p(480p) by Video select switch.)
• If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on
your TV. Then select 525p(480p) by using Video select switch.
• If 525p(480p) Video Output is selected by setting Video select switch, Video(Composite) and S-Video will not
work.
• Our set do not have Video output setting in setup menu.
Important Note
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan
settings in the TV’s menu system.
• Depending on your TV, the Method of connection may differ from the illustration above.
R - AUDIO - L VIDEO S-VIDEO
Good
picture
Better
picture
Best
picture
Optimum
picture Basic Audio
AV Cable S-Video
Cable
OR OR
Video
Cables
Audio Output
Jacks
Video Output
Jack
S-Video
Jack
Component Video
Jacks
(Interlace)
Component Video
Jacks
(Progressive)
TV
DVD
Player
Method 1 Method 2 Method 3 Method 4