Handling of compact discs – Tascam CD-RW402 User Manual

Page 9

Advertising
background image

1 – Introduction—Some notes and precautions

TASCAM CD-RW402 Owner’s Manual

9

disc, additional material can be recorded. The pack-
aging of CD-R discs will include one of the follow-
ing logos:

By contrast, a CD-RW disc can be used in much the
same way as a CD-R disc, but the last track or tracks
recorded can be erased before the disc has been
“finalized”, and the space on the disc can be re- used

for other recordings. The packaging of CD-RW discs
will include one of the following logos:

However, you should note that an audio CD created
using a CD-RW disc may not play back satisfactorily
on every audio CD player. It will, naturally, be play-
able on the CD-RW402. This is in no way a limita-
tion of the CD-RW402 itself, but of the difference
between the different types of media and the methods
used to read them.

CD-R discs created on the CD-RW402, by contrast,
may be played satisfactorily on the majority of audio
CD players.

Handling of compact discs

Observe the following:

• Always place compact discs in the tray with their

label facing upward (compact discs can only be
played on one side).

• To remove a disc from its storage case, press down

on the center of the case, and lift the disc out, hold-
ing it carefully by the edges.

• Finger marks and dust should be carefully wiped

off the disc’s recorded surface with a soft cloth.
Unlike conventional records, the compact disc has
no grooves to collect dust and microscopic debris,
so gently wiping with a soft cloth should remove
most particles.

• Wipe in a straight motion from the inside to the

outside of the disc. Small dust particles and light

stains will have absolutely no effect on reproduc-
tion quality.

• Never use such chemicals as record sprays, anti-

static sprays or fluid, benzine or thinner to clean
compact discs. Such chemicals will do irreparable
damage to the disc’s plastic surface.

• Discs should be returned to their cases after use to

avoid serious scratches that could cause the laser
pickup to “skip”.

• Don’t expose discs to direct sunlight or high

humidity and temperature for extended periods.
Long exposure to high temperature can warp the
disc.

• Only use circular compact discs. Avoid using non-

circular promotional, etc. discs.

• To keep the laser pickups clean, don’t touch them.

For the same reason, don’t leave the disc trays
opened unnecessarily.

Advertising