Multipoint setup menu – Toshiba PCS-1 User Manual

Page 41

Advertising
background image

PCS -1/1P

3-207-456-12 (1)

I:\3207456121PCS1WW\04SET.FM

masterpage:Left

41

Registering Local Information

C

h

a

p

te

r 2:

R

e

gi

s

tr

a

tio

n

an

d Se

tu

p

fo

r Sy
s

tem
A
d

m

in

is

tr

a

to

rs

When the remote videoconferencing system
does not support the Audio Mode selected by
the local site, the mode automatically switches
to “G.711”.

Far End Camera Control

When the conference starts with a call from
a remote party, selects whether to enable
control of each other’s cameras from each
other’s sites.
On: Enables control of each other’s

cameras.

Off: Disables control of the remote party’s

camera.

T.120 Data

Selects whether you conduct a data
conference via the T.120 standard using
NetMeeting.
On: Enables conduct of the T.120 data

conference.

Off: Disables conduct of the T.120 data

conference.

For details on the T.120 data conference,
see “Conducting a Data Conference Using
NetMeeting – T.120 Data Conference” on
page 112.

The Multipoint Setup menu is used when
you conduct a multipoint videoconference.

The Multipoint Setup menu is available when
the System has the optional PCS-320M1 H.320
MCU or PCS-323M1 H.323 MCU software
installed.

Page 1/2

Multipoint Mode

Selects whether you conduct a multipoint
videoconference.
On: Conducts a multipoint

videoconference.

Off: Does not conduct a multipoint

videoconference.

The Multipoint Mode can be selected with the
initial Setup menu (page 60).

Broadcast Mode

Selects the broadcast mode.
Split: Displays the pictures of the terminals

connected in split windows.

Voice Activate: Detects the terminal with

the speaker with the loudest voice, and
sends the picture of that terminal to all
other terminals.

Number of Lines

Selects the ISDN channels and the number
of remote points to be used for a multipoint
videoconference.
1B × 5: Connects to five points via a 1B

channel. (Six-point conference)

2B × 5: Connects to five points via 2B

channels. (Six-point conference)

4B × 3: Connects to three points via 4B

channels. (Four-point conference)

6B × 2: Connects to two points via 6B

channels. (Three-point conference)

Some of the above items are not available
depending on the number of ISDN lines you
are using.

Note

Multipoint Setup Menu

Note

Note

Note

ISDN

Page: 1/2

Off

Multipoint Setup

Multipoint Mode

Split

Broadcast Mode

2Bx5

Number of Lines

1024 Kbps

LAN Bandwidth

Auto

Restrict

Save

Cancel

Advertising
This manual is related to the following products: