Toshiba PCS-1 - Manual (Page 43)

PCS -1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\04SET.FM masterpage:Left
43
Registering Local Information
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
Mic Select
Selects the microphone to be used.
Internal: Uses the built-in microphone.
External: Uses the microphone connected
to the Communication Terminal.
DSB MIC: Uses the microphone connected
to the Data Solution Box.
DSB AUX IN: Used to expand future
system capability.
Lip Sync
Selects whether to enable the Lip Sync
function.
On: Enables the Lip Sync function. The
movement of the speaker’s lips is
synchronized with his voice.
Off: Disables the Lip Sync function.
Echo Canceler
Selects whether you use the echo canceler.
Internal: Enables the built-in echo canceler.
External: Uses the echo canceler of the
external equipment connected.
Off: Disables the built-in echo canceler.
Beep Sound
Selects whether the beep sounds when you
press the button on the Remote Commander.
On: Enables beep.
Off: Disables beep.
Recording Mute
When connecting a video cassette recorder
to the AUDIO IN/AUDIO OUT (MIXED)
jacks to record the sound for a conference,
the recording mute function prevents echo
from reflecting on a remote site. This item is
only available when “Input Select” is set to
“AUX” or “MIC + AUX”.
On: Enables the recording mute function.
Off: Disables the recording mute function.
Page 1/3
Terminal Name
Input the terminal name to report when the
system is connected to the external
multipoint videoconferencing system.
Dual Monitor
When two monitors are connected to the
System, selects whether you use the dual
monitor mode.
On: Enables the dual monitor mode. Still
images are always displayed on the
second monitor.
Off: Disables the dual monitor mode. Still
images are always displayed on the first
monitor.
For details on the dual monitor mode, see
“Using Two Monitors – Dual Monitor” on
page 101.
Monitor Out (or Sub Monitor Out)
Selects the output connected to the monitor
to which the signal is output.
This item changes to “Sub Monitor Out” if
“Dual Monitor” is set to “On”, and selects
the output connected to the sub-monitor
(second monitor) to which the signal is
output.
RGB OUT: Outputs from the RGB OUT
connector on the Communication
Terminal.
RGB OUT (DSB): Outputs from the RGB
OUT connector on the Data Solution
Box.
VIDEO OUT: Outputs from the VIDEO
OUT MONITOR MAIN or SUB
connector.
For details, see “Outputting Video Signals
to External Equipment” on page 109.
General Setup Menu
ISDN
Page: 1/3
General Setup
Terminal Name
On Dual Monitor
RGB OUT Monitor Out
30 minutes Standby Time
On Time Display
Save Cancel
On Standby Mode