Toshiba PCS-1 - Manual (Page 94)

94
Sending Motion Pictures as Still Images
PCS -1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\06OPE.FM masterpage:Left
During communication motion pictures output from the optional PCS-DS150/
DS150P Document Stand connected to the Communication Terminal can be
frozen, and you can send a still image to the remote party.
To send a still image
1
Shoot the image you want to send with the Document Stand.
For details how to operate the Document Stand, refer to the Operating
Instructions supplied with the Document Stand.
2
Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
then select the
(still image) icon with the V or v button.
3
Use the V, v, B or b button on the Remote Commander to select “Send
Object”, then press the PUSH ENTER button.
The picture shot by the Document Stand is displayed on the monitor screen and
is sent to the remote party as a still image.
Sending Motion Pictures Output from a Document Stand as Still
Images
PCS-DS150/DS150P
Document Stand (not
supplied)
Send
Continuous Send
Clear
Save
Send Object
Still Image