Toasters, Conveyor toasters – Toastmaster TP209 User Manual

Page 7

Advertising
background image

Telephone: 1-906-863-4401

www.toastmastercorp.com

5

Toasters

Toasters

Conveyor Toasters

Toastmaster’s commercial electronic conveyor toasters are designed to toast foods in

large quantities consistently, using continuous feed methods.

General Information:

The TC13 conveyors are designed specifically for breads and Texas

Toast, with a chamber opening of 1-3/8” high, while the TC17 and TC21 units have a

chamber opening height of 3”, providing the additional capability of toasting a broader

variety of product including buns, bagels and muffins.

All Toastmaster conveyor toasters come equipped with a loading rack that is angled to

feed the product into the toaster continuously. The unique air flow design keeps case, top

and sides cooler. Units are equipped with an auto cool-down feature which allows the fan

to cool the outer skin when the unit is turned off.

Construction:

Steel construction with a stainless steel finish is used for durability.

Includes a stainless steel, slide out crumb tray for easy cleaning. Both the TC17 and TC21

models include a fiberglass return tray, while the TC13 models have this feature built in.

Electrical:

The TC13 and TC17 models are available in 120V, 208V or 240V single phase,

while the TC21 models are available in 208V or 240V single phase only. A factory installed

6 foot cord and plug is included. (Please refer to individual unit chart for exact NEMA

plug and electrical requirements.)

Heating:

When control is set to “ON”, top and bottom quartz infrared elements (TC13) or

tubular elements (TC17 and TC21) will turn on to toast both sides of the bread. Lightness

and darkness of product is achieved by adjusting the top and bottom heat controls (TC17

and TC21) or by adjusting the conveyor belt speed (TC13). Standby position allows for

energy savings during non-peak periods.

Controls:

Rotary 3 position dial selects ON/OFF/STANDBY positions. Heat dials control

the upper and lower heating elements (TC17 and TC21) and a conveyor speed dial

controls the conveyor speed.

NEMA 5-15P (plug)

NEMA 5-20P (plug)

NEMA 5-30P (plug)

NEMA 6-20P (plug)

NEMA 6-15P (plug)

CHART: NEMA PLUGS (shown)

Advertising