Using auto accompaniment, Start the accompaniment – Yamaha PSR-320 User Manual

Page 26

Advertising
background image

25

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

SYNC-

START/STOP

START/STOP

INTRO

MAIN

ENDING

ACCOMP

LARGE/SMALL

A

B

AUTO FILL

Using Auto Accompaniment

You can also use the CURSOR buttons or the number buttons to select

the tempo value in the display, and then use the [–/NO] and [+/YES] but-
tons to set the tempo value as required. In this case the [–/NO] and [+/YES]
buttons can be pressed simultaneously to recall the default tempo. This can
be done either before the accompaniment is started or while it is playing.

6

Start the Accompaniment

.........................................................................................................

There are several ways to start the accompaniment:

Straight start:

Press the [START/STOP] button. The rhythm will begin playing imme-
diately without bass and chord accompaniment. The currently selected
MAIN [A] or [B] section will play.

• It is possible to select the MAIN

A or B section prior to a straight
start — refer to “8. Select the
MAIN A and B Sections as Re-
quired,” below.

Start with an introduction followed by the MAIN B variation:

Press the [INTRO] button so that its indicator lights, press the MAIN
[B] button (not necessary if its indicator is already flashing), then press
[START/STOP].

CURSOR

TEMPO

116

–/NO

+

/ YES

0

7

8

9

SYNC-

START/STOP

START/STOP

INTRO

MAIN

ENDING

ACCOMP

LARGE/SMALL

A

B

AUTO FILL

Start with an introduction followed by the MAIN A variation:

Press the [INTRO] button so that its indicator lights, press the MAIN
[A] button (not necessary if its indicator is already flashing), then press
[START/STOP].

SYNC-

START/STOP

START/STOP

INTRO

MAIN

ENDING

ACCOMP

LARGE/SMALL

A

B

AUTO FILL

• In this case, three-digit numbers

(i.e. “100” through “280”) are
entered by first pressing and
holding the [1] or [2] button until
“1” or “2” appears in the hun-
dreds position on the display,
then press the remaining two
digits in sequence.

Advertising
This manual is related to the following products: