Yamaha PSR-4000 - Manual (Page 87)

83
Custom Voice Edit
■
TUNE (except for the DRUM KITS) .............................................................................................................................................
These parameters adjust the pitch of the voice.
COARSE tunes in semitone steps and FINE tunes in
1-cent steps (a cent is 1/100th of a semitone). The
maximum
COARSE range is from –24 to +24 semi-
tones (plus or minus two octaves), and the maximum
FINE range is from –50 to +50 cents. Normal pitch
is produced when both parameters are set to “0”.
■
VOLUME (except for the DRUM KITS) ...........
■
KEY ON DELAY
(except for the DRUM KITS) .....................................
Sets the time before the envelope begins after a
key is pressed. The higher the value the longer the
delay.
■
PAN
....................................................................................
Sets the element volume. The higher the value
the higher the volume.
The PAN LCD [▲/▼] control can be used to
position the voice in the center of the stereo sound
field, or to the left or right in 10 steps.
NOTES
• Depending upon the selected DSP EFFECT type, some
PAN parameters may not function.
E2:CONTROLLER
■
PITCH BEND WHEEL
...............................................................................................................................................................
Use the PITCH LCD [▲/▼] controls to set the
maximum PITCH BEND wheel range in semitone
steps. The maximum pitch bend wheel range is from
0 to 12 semitones.