Traulsen TU044HT - Manual (Page 17)

VII. r - VIEWING SENSOR TEMPERATURES:
These parameters allow a service technician or customer to view the temperature of all sensors within the unit. The
temperatures cannot be adjusted.
Follow the instructions to enter the customer access code on page 8. When the control displays Thermostat Set Point
High , press the up arrow key unit the display reads Cabinet Air Sensor Evaporator Coil Sen-
sor or Disharge Line Sensor or press the SET button . The display will read the temperature
of the designated sensor.
Press the UP or DOWN arrow keys to scroll through the parameters or press the ALARM CANCEL button
to exit.
VII. MICROPROCESSOR CONTROL (continued)
-16-
SET
)
)
)
VII. q - SETTING THE AUDIBLE ALARM STYLE:
These parameters will allow the customer to turn on/off the audible alarm feature on the INTELA-TRAUL ® control. The
audible alarm is preset from the factory to OFF. The customer can choose between an audible alarm that sounds for 3
seconds then automatically turns off, or a continuous audible alarm that must be manually acknowledged. Regardless of
this feature’s setting, visual alarm text will display when conditions warrant.
To adjust this setting, follow the instructions to enter the customer access code on page 8. When the control displays
Thermostat Set Point High, press the up arrow key until the display reads Audible Alarm
Style. Press the set button . The display will read OFF. Use the arrow keys to scroll be-
tween for the 3-Second Audible Alarm Burst or for Continuous Audible Alarm. When the display
shows your choice of style, press the set button . The display will then read thermostat Set Point High.
Use the arrow keys to scroll to the next parameter or press the Alarm Cancel Button to exit.
SET
SET
)
)
)