TANDBERG MPS API Interface D13639 - Manual (Page 21)

TANDBERG MPS API
User Guide
19
2.1.4 Exposure options
By adding an exposure option after the address (XPath or SimplePath) expression, the system
can be instructed to return only parts of the information within an element structure.
<root command> <address expression> <exposure option>
Supported exposure options:
• “-“ hides all value elements
• “--" hides all sub-elements
Example 2.2
Request for Call 1 element with no exposure option
xstatus call 1
*s Call 1 (status=Synced, type=Vtlph, protocol=H323,
direction=Outgoing):
CallRate: 768
RemoteNumber: "10.47.15.127"
Mute: Off
Microphone: Off
Duration: 10
Channels 1 (type=Incoming):
Rate: 768
Restrict: Off
Encryption (status=Off): /
Audio (status=Active):
Protocol: G722
Rate: 64
Video 1 (status=Active):
Protocol: H263
Resolution: CIF
Rate: 704
Video 2 (status=Inactive): /
Data (status=Inactive): /
Channels 2 (type=Outgoing):
Rate: 768
Restrict: Off
Encryption (status=Off): /
Audio (status=Active):
Protocol: G722
Rate: 64
Video 1 (status=Active):
Protocol: H263+
Resolution: ICIF
Rate: 704
Video 2 (status=Inactive): /
Data (status=Inactive): /
*s/end
Request for Call 1 element with exposure option “-“:
xstatus call 1 -
*s Call 1 (status=Synced, type=Vtlph, protocol=H323,
direction=Outgoing):
Channels 1 (type=Incoming):
Encryption (status=Off): /