TANDBERG MPS API Interface D13639 - Manual (Page 44)

TANDBERG MPS API
User Guide
42
LoS Polarity: <Positive/Negative>
LoS Retry: <0..65535>
MCU MCU AdditiveRegEnable: <On/Off>
MCU H264: <On/Off>
MCU H264RCDO: <On/Off>
MediaBoard MediaBoard [1..12] IP Address: <IPAddr>
MediaBoard [1..12] IP SubnetMask: <IPAddr>
MediaBoard [1..12] IP Gateway: <IPAddr>
MediaBoard [1..12] IP NetworkId: <1..2>
MediaBoard [1..12] Ethernet Speed:
<Auto/10half/10full/100half/100full/None>
MediaBoard [1..12] Description: <S: 0, 16>
NetProfile NetProfile [1..7] Name: <S: 0, 8>
NetProfile [1..7] CallPrefix: <S: 0, 9>
NetProfile 1 Network: <Auto>
NetProfile 2 Network: <H320>
NetProfile 3 Network: <H323>
NetProfile 4 Network: <H320/H323/SIP/Auto>
NetProfile 5 Network: <H320/H323/SIP/Auto>
NetProfile 6 Network: <H320/H323/SIP/Auto>
NetProfile 7 Network: <SIP>
NTP NTP Address: <IPv4v6Addr: 0, 43>
AllowNTSCCP AllowNTSCCP: <On/Off>
PrefixDialIn PrefixDialIn AdHoc H323ID: <S: 0, 50>
PrefixDialIn AdHoc H323Alias: <E164: 0, 31>
PrefixDialIn DID H323ID: <S: 0, 50>
PrefixDialIn DID H323Alias: <E164: 0, 31>
QoS QoS [1..2] Precedence Telephony Audio:
<0/1/2/3/4/5/6/7/Auto/Off>