TANDBERG MPS API Interface D13639 - Manual (Page 51)

TANDBERG MPS API
User Guide
49
•
Cause: <1…> Cause code specifying why the command was not
accepted by the system
•
Description Textual description of the cause code.
Example:
xcommand callmute call:2 mode:on
*r Result (status=OK):
*r/end
OK
CallMuteOutgoing Command used to mute outgoing audio from a specific call.
Parameters:
•
Call(r): <1..128> Reference to the call to be muted or unmuted.
•
Mode(r): <On/Off> Denotes whether the call is to be muted or
unmuted.
OK Result parameters:
None
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the command was not
accepted by the system
•
Description Textual description of the cause code.
Example:
xcommand CallMuteOutgoing call:2 mode:on
*r Result (status=OK):
*r/end
OK
CallTransfer Command used to transfer the H.323 party of a Gateway call to another
H.323 party.
Parameters:
•
GatewayCall(r): <1..80
•
Number(r): <S: 0, 60>
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the call was not accepted
by the system
•
Description Textual description of the cause code.
CallTransferToDirEntry Command used to transfer the H.323 party of a Gateway call to a H.323
directory entry in the local phone book.
Parameters:
•
GatewayCall(r): <1..80>
•
DirectoryEntry(r): <1..99>
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the call was not accepted
by the system
•
Description Textual description of the cause code.