TANDBERG MPS API Interface D13639 - Manual (Page 54)

TANDBERG MPS API
User Guide
52
•
AudioG728: <On/Off>
•
CascadingPreference: <Auto/Master/Slave>
•
BillingCode: <S: 0, 16>
•
CPAutoSwitch: <0..60>
•
NetworkId: <1..32>
•
ConferenceSelfview: <On/Off>
•
Protect: <On/Off>
•
TemplateReference: <1..10>
•
HDEnabled: <On/Off>
OK Result parameters:
None
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the command was not
accepted by the system
•
Description Textual description of the cause code.
Example:
xcommand conferenceredifine conference:1 duovideo:on
restrict:on
*r Result (status=OK):
*r/end
OK
ConferenceStart Command used to start a new conference.
Parameters:
•
Conference(r): <1..35>
•
Name: <S: 0, 30>
•
CallRate:
<1xh221/2xh221/64/128/192/256/320/384/H0/512/768/1152/1472/15
36/1920/Tlph>
•
Restrict: <On/Off>
•
Password: <S: 0, 8>
•
PasswordOnOutgoingCalls: <On/Off>
•
Encryption: <On/Off>
•
EncryptionType: <DES/AES-128/Auto>
•
SecondaryRate: <On/Off>
•
WelcomeMessage: <On/Off>
•
DuoVideo: <On/Off>
•
AudioG728: <On/Off>
•
CascadingPreference: <Auto/Master/Slave>
•
BillingCode: <S: 0, 16>
•
CPAutoSwitch: <0..60>
•
NetworkId: <1..32>
•
ConferenceSelfview: <On/Off>
•
Protect: <On/Off>
•
TemplateReference: <1..10>
•
HDEnabled: <On/Off>onference(r): <1..12>
OK Result parameters:
None
ERROR Result parameters:
•
Cause: <1…> Cause code specifying why the command was not
accepted by the system