Toshiba 32SL415U - Manual (Page 44)

Chapter 6: Basic features
44
Setting Automatic Power Down
The TV can be configured to automatically turn itself
off after 4 hours if you do not operate the TV either
from the remote control or the TV control panel.
1無
> Settings > PREFERENCES > Energy Saving
Settings > .
2無
Press p or q to select Automatic Power Down.
3無
Press t or u to select On. Press .
Note:
• When the following features are set, the feature
that is set for the nearest time will function.
−Automatic Power Down
−Sleep Timer
−Wallpaper/Auto Power Off
−Auto shutdown after 1 hour of inactivity (after
powering on by On Timer)
−No signal auto power off (after 14 minutes of
no signal)
Setting No Signal Power Down
When an input’s setting in this feature is set to On,
The TV will automatically turn itself off after 14
minutes if no signal is detected. You can change each
input’s setting to Off: ANT/CABLE, Video 1, Video
2, ColorStream HD1, ColorStream HD2, HDMI 1,
HDMI 2, HDMI 3, HDMI 4 (except 24SL415U), PC.
1無
> Settings > PREFERENCES > Energy Saving
Settings. Press .
2無
Press p or q to select No Signal Power Down.
Press .
3無
Press p or q to highlight the item you want to
change.
4無
Press t or u to select Off or On. Press .
Note:
• Default setting for each input is On.
• A warning message will appear 1 minute before
turning off.
Displaying TV status information
To display TV status information:
Press
.
The following information will be displayed
(if applicable):
• Current input (
ANT/CABLE, Video, etc.)
• Either “CABLE” (for cable TV) or “ANT” (for over-the-
air broadcasts), if ANT/CABLE is the current input.
• Channel number (if in ANT/CABLE mode)
• Input label (if set)
• Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signals only)
• Stereo, Mono, or SAP audio status (when in HDMI
input mode, PCM)
• Video resolution
• Aspect ratio of incoming video signal (4:3 or 16:9)
• V-Chip rating status (if applicable)
• GameTimer (if set)
• Channel Label (If set or received)
To close the screen:
Press
again.
The following additional information (only available
for
ANT/CABLE input) will display for off-air digital
channels (if applicable):
• Title
• Duration
• Detailed description
To display the next program’s information for digital
channels, press
again. Pressing a third time
will remove the entire banner.