Toshiba 32SL415U - Manual (Page 6)

6
CAUTION: Always place the TV on the floor or a sturdy,
level, stable surface that can support the weight of
the unit. To secure the TV, use a sturdy strap from
the hook(s) on the rear of the TV to a wall stud, pillar,
or other immovable structure. Make sure the strap is
tight, secure, and parallel to the floor.
4) Follow the instructions provided with your wall
bracket. Before proceeding, make sure the
appropriate bracket(s) are attached to the wall and
the back of the TV as described in the instructions
provided with the wall bracket.
5) After attaching the appropriate bracket(s) to the
wall and the back of the TV, remove the pedestal
stand from the TV as described on below.
6) VESA Mounting Pattern
TV Size Hole Pattern(HxV) Screw Size
24” 100x100 mm M4
32’’ 200x200 mm M6
40’’ 200x200 mm M6
(unit in mm)
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
Note:
Extreme care should always be used
when removing the pedestal stand to avoid
damage to the LCD panel.
2) Remove the four screws shown in the right
diagram. This will allow removal of the pedestal
stand.
3) Once you have removed all the pedestal stand
screws, remove the pedestal stand from the TV.
32” TV
Four screws
VESA Mounting Pattern
Hook
Sturdy strap
(as short as possible)
Four screws
24” TV
VESA Mounting Pattern
40” TV
Four screws
VESA Mounting Pattern
Hook
Sturdy strap
(as short as possible)
Four screws