Toshiba 32SL415U - Manual (Page 50)

Chapter 7: Picture and sound controls
50
Using the advanced picture
settings features
Note: Some of the Advanced Picture Settings
features will not be available for adjustment
when the Picture Mode is set to AutoView.
Edge Enhancer
The Edge Enhancer feature lets you adjust the levels
for your desired picture settings and achieve a sharper
picture.
To set Edge Enhancer:
1無
> Settings > PICTURE > Advanced Picture
Setting s > .
2無
Press p or q to select Edge Enhancer. Press .
3無
Press t or u to select On.
4無
Press p or q to highlight Level. Press t or u to
select either 1, 2, 3, 4, or 5 and press .
Note:
• When the Picture Mode is set to AutoView,
the level range is from -2 to +2.
• If the Picture Mode is set to Game or PC,
Edge Enhancer is not available.
• This feature may not work properly
depending on the content.
• Noise may appear on the image depending
on the device connected to the TV (e.g. a
device with a specific enhancer function).
Dynamic Contrast
Dynamic Contrast detects changes in picture quality
that affect the appearance of your contrast settings
and then automatically adjusts the video.
1無
> Settings > PICTURE > Advanced Picture
Settings > .
2無
Press p or q to select Dynamic Contrast.
3無
Press t or u to adjust the level. The adjustment
range is from
0 to 10. Press .
Note: When the Picture Mode is set to AutoView,
the level range is from -5 to +5.
DynaLight ™
The DynaLight ™ feature automatically strengthens the
black coloring of dark areas in the video according to
the level of darkness.
1無
> Settings > PICTURE > Advanced Picture
Settings > .
2無
Press p or q to select DynaLight.
3無
Press t or u to select On or Off. Press .
Static Gamma
The static gamma feature lets you adjust the levels of
black in the picture.
To adjust the static gamma settings:
1無
> Settings > PICTURE > Advanced Picture
Settings > .
2無
Press p or q to select Static Gamma.
3無
Press t or u to adjust the level. The adjustment
range is within ±15 from center. Press
.
MPEG NR
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression.
1無
> Settings > PICTURE > Advanced Picture
Settings > .
2無
Press p or q to select Noise Reduction. Press .
3無
Press p or q to highlight MPEG NR.
4無
Press t or u to select either Low, Middle, High, or
Off. Press .
Note: If the Picture Mode is set to Game or PC,
this feature is not available.
DNR
DNR lets you soften the screen representation of a
weak signal to reduce the noise effect.
1無
> Settings > PICTURE > Advanced Picture
Settings > .
2無
Press p or q to select Noise Reduction. Press .
3無
Press p or q to select DNR.
4無
Press t or u to select Low, Middle, High, Auto, or
Off. Press .
Note:
• If the Picture Mode is set to Game or PC, this
feature is not available.