Toshiba Tosvert RS485 - Manual (Page 65)

E6581315
64
＊ 1 : Enable the communication command or communication frequency setting before setting these
parameters are set. Otherwise, the parameters will not function. See “8.1 Command by
communication” for the method to enable them.
＊ 2 : Note that the Communication Number for operation panel operation frequency is FA02 in the
VF-S7 and VF-S9 series.
＊ 3 : See “8.1 Communication commands (commande from the computer)” for the detail information.
＊ 4 : See “8.3 Utilizing panel (LEDs and keys) by communication” for the detail information.