Teac DVD Receiver DR-H300 - Manual (Page 30)

DVD VCD CD
30
Programmed playback
Up to 20 chapters/tracks can be programmed in the desired
order.
If another source is selected, press the DISC button or
the FUNCTION button to select “DISC”. 1
Press the PROGRAM button. 2
The program list appears on the screen.
< To cancel the program mode, press the PROGRAM button
again, or select “EXIT” using the cursor buttons and press the
ENTER button.
Enter your desired “title and chapter number” or “track
number” using the numeric buttons. 3
Example:
To enter number 5, press “0” and “5”.
Repeat this step to program more chapters/tracks.
< If you made a mistake, move the cursor on the track number
and overwrite it using the numeric buttons.
< To program more than 11 chapters/tracks, press the /
button to advance to the next program page (or select “tl”
using the cursor buttons and press the ENTER button). Press
the . button to return to the previous page.
When the selection of chapter/track numbers is
completed, select “START” using the cursor buttons and
press the ENTER button to start programmed playback. 4
< During programmed playback, the numeric buttons don’t
work.
< When playback ends, the program is cleared.
< If you press one of the following buttons, the programmed
contents will also be cleared.
OPEN/CLOSE, STANDBY/ON, STOP
FUNCTION (AUX, USB, TUNER)