Parental (parental control), Password mode, Password – Teac DVD Receiver DR-H300 User Manual

Page 37: Settings (password setup page)

Advertising
background image

37

ENGLISH

Parental (Parental control)

Playback of some DVD discs can be limited depending on the
age of the users. The parental comtrol system allows the
playback limitation level to be set by the parent. The default
setting is “8”.

Notes

<

The lower the level, the stricter the limitation.

<

If the rating of the loaded DVD disc is higher than the level
you set, the system will require a password. Enter your
password and press the ENTER button to start playback.

1. Select the desired parental control level from the menu, then

press ENTER to save it.

2. You will be prompted to enter your password. Use the

numeric buttons to enter 2580 (or your privacy password if
already established).

No need to enter a password if “Password Mode” is set to
OFF.

Password Mode

To change this setting, select ON or OFF, enter your
password, and press the ENTER button.

ON

You need a password to change the level of parental control.

OFF

You can change the level of parental control without a
password.
You cannot temporarily unlock discs for playback.

Settings (Password Setup Page)

Password

You can set a new password for parental control. The default
password is 2580.

1. Select “Change” and press the ENTER button.

2. Enter 2580 (or your privacy password) using the numeric

buttons.

3. Enter a new password.

4. Enter the same password again to confirm.

5. Press the ENTER button.

Remenber your password as you will need it to change the
level of control in the future as well as to temporarily unlock
discs for playback.
If you forget your password, use 2580.

Advertising