Setting the timer – Teac DVD Receiver DR-H300 User Manual
Page 42
42
Setting the Timer
<
The unit can be programmed to turn on at a specified time.
<
Adjust the clock before setting the timer.
If the unit is on, press the STANDBY/ON switch to turn
it standby
Press the TIMER button.
2
1
“TIMER SET” briefly appears on the display, and the “hour”
value starts blinking.
<
When no button is pressed for 10 seconds, the timer setting
mode will be cancelled.
The “minutes” value starts blinking.
Press the VOLUME button to set the start time (minute),
and then press the TIMER button.
4
“ON” or “OFF” starts blinking.
Press the VOLUME button to set the start time (hour),
and then press the TIMER button.
3
Press the VOLUME button to turn ON or OFF the timer
function, and then press the TIMER button.
5
Select ON to turn the timer function on.
The TIMER indicator (
) appears on the display.
When you don’t use the timer, select OFF. (The TIMER
indicator disappears from the display.)
TIMER
VOLUME