Connections and setup – Technicolor - Thomson DPL953REC User Manual
Page 10
Connections and Setup
10
EN
5.
To move a channel, use the
and
buttons to
select the channel you wish to move.Then select the
Move to option and press
ENTER
.Then use the
and
buttons to reach the position you wish to
store the channel in and press
ENTER
.The channel
will move to the new position.
6.
Use the Enable/Disable option to include the
selected channel in the channel loop.To do so, select
the channel using the
and
buttons, select
Enable/Disable and press
ENTER
.
7.
Press
SETUP
to leave the menu.
Manual installation
1.
Press the
SETUP
button. Select the TV Tuner
option using the
and
buttons and press
or
ENTER
.
2.
Select the Modify Channel option using the
and
buttons and press
or
ENTER
.
3.
Select the channel to modify using the
and
buttons and press
to access the sub-menu.
4.
To add a channel, select Add Channel and press
ENTER
.
The channel can be fine tuned to improve picture
quality. Select Fine Tune and use the
and
buttons to adjust the picture. Select Done and press
ENTER
when you are finished.
To delete a channel, select Delete Channel and
press
ENTER
.
If the channel is encoded (and a decoder is connected
to the DVD recorder), select the Decoder In option
and press
ENTER
to activate or deactivate the
option.
5.
Once all settings are completed, select Done and
press
ENTER
.
Add Channel
Fine Tune
Delete Channel
Decoder In : OFF
Done
Modify Channel
DPL953REC_EN 17/11/05 8:58 Page 10