Technicolor - Thomson DPL953REC - Manual (Page 12)

Basic Playback Operations
12
EN
Status menu
Press the DISPLAY button a number of times
during playback to show in turn:
DVD:Title elapsed time,Title remaining
time, Chapter elapsed time, Chapter
remaining time, Display Off;
VCD, SVCD and audio CD: Single
elapsed time, Single remaining time,Total
elapsed time,Total remaining time, Display
Off.
Note: On a Video CD with PBC (Playback
Control), turn off the PBC option to display the
Status menu.
PBC - PlayBack Control (VCD)
The PlayBack Control function offers scenes
and information which can be selected
interactively via a menu. It can also be used to
display high-resolution pictures, if the disc
contains any.
Press the MENU/PBC button during playback
to enable or disable this function.
Play modes
Repeat playback
While the disc is playing, press the REPEAT
button several times to select a play mode:
DVD: Chapter repeat,Title repeat, Repeat
Off,
VCD, SVCD and audio CD: Repeat one,
Repeat all, Repeat Off.
A-B repeat
To repeat a sequence between two points A
and B, press the
A-B button at the beginning of
the sequence you want to repeat.
Then press the
A-B button again at the end of
the sequence.
Then the sequence is played repeatedly until
you press
A-B to resume normal playback.
Note: A-B repeat can only be used within the
same chapter or track.
Shuffle playback (VCD, SVCD and
audio CD)
You can play all the tracks on the disc in a
shuffle order (chosen by the player).
1. Press to stop playback.
2. Press the SHUFFLE button to activate
the shuffle playback function.
3. Press to start the shuffle playback.
4. To stop shuffle playback, press twice and
then press SHUFFLE again to deactivate
the shuffle playback function.
Programme playback (VCD
and audio CD)
With this option, you choose and programme
the playback order.
1. Press to stop playback.
2. Press the SLOW/PROG button to enter
the Programme playback mode.
PROGRAM P00:00 appears on the TV
screen.
3. Enter the track number using the numeric
buttons. The first number corresponds to
the programme number and the second
number corresponds to the track number.
Then press
ENTER .
Note: If you make a mistake, press the CLEAR
button to erase numbers.
Repeat this step to add other tracks to the
playback list.
4. Press to start playback.
Tracks are played in the order of the
playback list. Playback stops once all tracks
have been played.
Note:The playback list is erased when you press
the button
twice.
5. To exit the Programme playback function,
press the
SLOW/PROG button again.
DPL953REC_EN 17/11/05 8:58 Page 12