Technicolor - Thomson DPL953REC - Manual (Page 16)

Recording
16
EN
If you select Once, enter the date of the
recording using
and or the numeric
buttons, and and to move the cursor.
If you select Repeat, select one or several
days using
and and pressing ENTER .
When finished, select Done and press
ENTER .
6. Select Input Source using and and
press
ENTER .
Use and to select the recording
source and press ENTER .
7. Select Channel using and and press
ENTER .
Use and to select the channel you
wish to record, select Done and press
ENTER .
8. Select Quality using and and press
ENTER .
Use and to select the recording
quality, select Done and press ENTER .
9. Select Title using and and press
ENTER .
Press ENTER again. Use , , and
to select a letter or a number and press
ENTER .The title can include up to 10
characters.
Note: If you make a mistake, select Delete to
cancel the last typed character and press
ENTER , or select Clear to cancel the whole
title and press ENTER .
When finished, select Done and press
ENTER .
Select Done and press ENTER again.
10. Once all settings are completed, select
Done once again and press
ENTER .
11. Put the DVD recorder in standby mode by
pressing the
STANDBY/ON button on
the remote control. It is now ready to
record at the time you have specified.
To check your programming
1. Press the TIMER button.The “My Record
List” menu appears.
2. If the list is correct, press to return to
the previous menu or TIMER to exit.
3. If you want to change or delete a
recording, select it using
and .
4. To change the selected recording, select
Edit using and and
press ENTER .
Use the and buttons to select the
section you wish to change and press
ENTER to modify the settings.
5. To delete the selected recording, select
Delete using and and
press
ENTER . Press ENTER again to confirm.
6. Press TIMER to exit.
Record Show
New Title :
Delete Clear
Done Cancel
Press TIMER to exit.
Space
DPL953REC_EN 17/11/05 8:58 Page 16