Tascam DP-02 - Manual (Page 20)

IMPORTANT SAFETY PRECAUTIONS
0
TASCAM DP-02/DP-02CF
1 – Starting out with your DP-02/DP-02CF
D CompactFlash card slot (on the DP-02CF)
Insert a CF card into this slot.
After inserting the card, make sure the door is closed.
With the door opened, the DP-02CF will not operate.
D
Side panel (DP-02CF only)
W USB jack
A USB cable is connected to a computer which allows
import or export of files between the unit and the
computer (see “Using the USB connection” on page 42).
NOTE
When the unit is connected to a PC using this jack, the
FAT partition on the
recording media is the only recog-
nizable device.
E DC IN jack
The supplied AC adapter (PS-1225L) is connected here.
R DIGITAL OUT (OPTICAL) jack
The stereo mixed signals are output in S/PDIF format.
T MIDI OUT jack
MIDI signals such as MIDI Clock, MIDI Time Code,
and Song Position Pointer are output here.
Y LINE OUT (L,R) (RCA) jacks
The analog signals mixed in stereo are output.
U STEREO MIX jack
The signals input through this 1/8” stereo mini jack are
mixed in stereo and output from the
LINE OUTPUT or
PHONES jacks.
I SEND jack (1/4 phone )
The EFFECT SEND signal is output.
O RETURN (1/4 phone) jack
The stereo signal output from the external effector is
inputted through this jack.
P INPUT A / INPUT B (XLR) jack
These XLR connectors are balanced analog inputs.
When PHANTOM is on, these connectors are supplied
with 48 V phantom power.
A INPUT A/INPUT B (1/4” phone) jack
These 1/4” connectors are unbalanced analog inputs.
The INPUT A jack can be connected to a guitar direc-
tory.
S GUITAR, MIC / LINE switch
Set to GUITAR or MIC / LINE to select which type of
input signal is connected to the INPUT A jack.
Rear panel