Tascam DP-02 - Manual (Page 55)

IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF

Specifications
Analog specifications
INPUTs (A and B) 1/4” phone (unbalanced) XLR balanced
Input impedance >10 kΩ (max), or 1 MΩ (A only) with 2.4 kΩ
switch in GUITAR position
Nominal input level
-4 dBV -8 dBu
Maximum input level +12 dBV +8 dBu
EFFECT RETURN 2 x 1/4” phone (unbalanced)
Input impedance 10 kΩ
Nominal input level –10 dBV
Maximum input level +6 dBV
STEREO MIX 1/8” stereo mini jack (unbalanced)
Input impedance 10 kΩ
Nominal input level –10 dBV
Maximum input level +6 dBV
LINE OUTPUT 2 x unbalanced RCA (pin) jacks
Output impedance 1 kΩ
Nominal output level –10 dBV
Maximum output level +6 dBV
EFFECT SEND 1 x 1/4” phone (unbalanced)
Output impedance 1 kΩ
Nominal output level –10 dBV
Maximum output level +6 dBV
PHONES 1/4” stereo jack
Maximum output 25 mW + 25 mW (into 30Ω)
Digital specifications
DIGITAL OUT Optical digital audio output (TOSLINK)
Data format S/PDIF 1
Audio performance
Frequency response 20 ０Hz – 20 kHz, +1 dB/3 dB
Signal-to-noise ratio > 85 dB (A-weighting, 22 kHz LPF)
Total harmonic distortion < 0.02% (1 kHz, 10 dBV, 22 kHz LPF, MASTER fader at nominal)
Physical characteristics
External power adapter AC input 100 – 240 V AC, 50/60 Hz
External power adapter output 12V
External power adapter output current 2.5A
Power consumption DP-02: 11 W / DP-02CF : 8 W
Dimensions (w x h x d) DP-02 /DP-02CF: 416 x 65.4 x 298.6 (mm) 16.4” x 2.6” x 11.8”
Weight DP-02: 4.5 kg (9.9 lb) / DP-02CF : 4.1 kg (9.0 lb)
3 – Specifications