Tascam DP-02 - Manual (Page 31)

IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF
1
2 – Advanced techniques
EQ settings
On the unit, you can set the frequency at which the EQ
HIGH and EQ LOW controls work; individually for each
channel.
T I P
This can help you emphasize the particular frequency
ranges on a track.
1. Press the FREQ key . The display shows:
2. Use the cursor keys to highlight frequency you want
to change and the dial to set these parameters.
H
(High) This is the high frequency control. Choose
from 1.7 to 18 kHz.
L (Low) This is the low frequency control. Choose
from 32 Hz to 1.6 kHz.