Toshiba Satellite 2450 - Manual (Page 155)

8-21
O
PTIONAL
D
EVICES
TV
3. Close the lid and slide the lock to the lock position.
Figure 8-24 Closing the lid
For details on installing the Slim Select Bay HDD adaptor in the Slim Select Bay,
refer to Chapter 4,
Operating Basics .
External monitor
An external analog monitor can be connected to the external monitor port on the
computer. The computer supports VGA and Super VGA video modes. To connect a
monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor’s power on.
4. Turn the computer on.
When you turn on the power, the computer automatically recognizes the monitor
and determines whether it is color or monochrome.
To change the display settings, press Fn + F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn + F5 to switch to the internal
display. Refer to Chapter 5,
The Keyboard , for details on using hot keys to change
the display setting.