S7 connection completion time-out, S8 comma pause time, S11 dtmf dialing speed – Toshiba Satellite 2450 User Manual

Page 214: S12 escape guard time

Advertising
background image

User's Manual

D-4

A

PPENDIX

D

S7

Connection completion time-out

This register sets the time, in seconds, that the modem must wait
before hanging up because carrier is not detected. The timer is started
when the modem finishes dialing (originate), or goes off-hook (an-
swer). In originate mode, the timer is reset upon detection of an answer
tone if allowed by county restriction. The timer also specifies the wait
for silence time for the @ dial modifier in seconds. S7 is not associated
with the W dial modifier.

Range: 1-255

Default: 50

Units:

seconds

S8

Comma pause time

This register sets the time, in seconds, that the modem must pause
when it encounters a comma (,) in the dial command string. In some
countries/regions, S8 will set both wait before dialing and comma
pause time.

Range: 0-255

Default: 2

Units:

seconds

S11 DTMF dialing speed

This register determines the dialing speed which is prefixed for each
country/region.

Range: 50-255

Default: 95

Units:

.001 seconds

S12 Escape guard time

This register sets the value (in 20 millisecond increments) for the
required pause after the escape sequence.

Range: 0-255

Default: 50

Units:

.02 seconds

Advertising